What is refrigerant r410?

　　Refrigerant r410, also known as Puron, is a refrigerant that was developed in 1991 by a company now called Honeywell. Although this refrigerant will still cause global warming, it will not deplete the Ozone layer.

　　Houston Air Conditioning Services recommends this newer refrigerant because it can save you energy and electricity bills every month. The refrigerant does not cause the compressor to overheat, which means that its operating power is lower than that of an air-conditioning unit equipped with R22. Refrigerant r410 can also operate at higher pressures, so new devices compatible with this refrigerant can withstand pressure and reduce the chance of cracking.

　　R22 air conditioners use mineral oil for lubrication, while refrigerant r410 models use synthetic oil. Synthetic oil is more soluble in refrigerant r410 air conditioner than mineral oil in the R22 air conditioner. This means that new air conditioners wear less, which means they can last longer and have problems less frequently. All air conditioners need oil to maintain lubrication during operation.

　　Why refrigerant r410 is important

　　HVAC manufacturers will completely stop producing R22 refrigerant in 2020, although some air-conditioning services will phase it out earlier than this. If you still own an air conditioner unit using R22 refrigerant, you should consider replacing it with a newer air conditioner using refrigerant r410. You will have the opportunity to obtain it from Houston Air Conditioning Service next time. As R22 is phased out, the resources used to repair these devices will spend more in the future and will be exhausted over time.

　　Can you simply replace the refrigerant while keeping the existing air conditioner? Unfortunately, the answer is no. As mentioned earlier, refrigerant r410 operates at a higher pressure than R22, so the refrigerant needs newer parts inside the air conditioner to better handle it. If you have tried to put the refrigerant r410 into the R22 air conditioner, the model will experience too much pressure and malfunction. You cannot add refrigerant r410 to the equipment that intends to use R22 refrigerant, so you need to replace the air conditioner with an air conditioner compatible with refrigerant r410.

　　Although it is costly to completely purchase a new air conditioning unit, it is also expensive to maintain an R22-equipped air conditioner until it blows out the last breath of cold air. With more frequent maintenance and more expensive repairs, it is easy for you to upgrade to newer models that use newer refrigerants. With a newer device, you will not have to worry about any possible problems for a long time, and it will definitely do a better job of saving power and avoiding overheating. Charging the system using refrigerant r410 is also more economical.